Các đo lường phạm vi và đo lường tỷ lệ phạm vi của a kỹ thuật số vạn năng
Đo lường Phạm vi
There is a contradiction between measurement rate and accuracy indicators, normally the higher the accuracy, the lower the the measurement rate, and it is hard to balance the two. To solve this contradiction, different display digits or measurement speed conversiones switches can be set on the same multimeter: add a fast measurement gear, which is used for A/D converters with faster measurement speed; By reducing the number of display digits to importantly boost the measurement rate, this method is relatively relatively common in application and can meet the needs of different users for measurement rate.
Biện pháp phòng ngừa cho sử dụng
1. Before using a multimeter, it is necessary to perform a "mechanical zero adjustment", which means that when there is no measured electricity, the multimeter pointer should be positioned at zero voltage or zero current.
2. Trong thời gian sử dụng của a vạn năng, do không chạm kim loại phần đầu dò đầu dò với của bạn tay. Điều này đảm bảo chính xác đo lường và cá nhân an toàn.
3. Khi nào đo lường a chắc chắn số lượng of điện, it is không khuyến khích đến shift bánh răng đồng thời% 2c đặc biệt khi đo lường cao điện áp hoặc cao dòng điện. Nếu không, it có thể gây ra thiệt hại đến đồng hồ vạn năng. Nếu bạn cần đến dịch chuyển bánh răng% 2c bạn nên đầu tiên ngắt kết nối đầu dò và sau đó lấy đo lường sau dịch chuyển bánh răng.
4. Khi sử dụng a vạn năng, it phải được đặt ngang đến tránh lỗi. Tại giống nhau thời gian% 2c chú ý nên cũng được trả tiền đến tránh ảnh hưởng của bên ngoài từ tính trường trên đồng hồ vạn năng.
5. Sau sử dụng đồng hồ vạn năng, the transfer switch nên be set to the maximum AC điện áp. Nếu không in use for a long time, the battery inside the multimeter should also be removed to prevent the battery from corroding other components inside the meter.
