GVDA Loại bút kỹ thuật số Đồng hồ vạn năng Máy đo điện áp xoay chiều DC Thông minh Đa - mét Vôn kế NCV Trình tự pha Tự động đo khoảng cách đa năng
GD109 is a pocket type digits pen-type smart multimeter, with true RMS. It will automatically identify DC voltage/AC voltage/resistance and measure, with no need to turn the dial to switch, easy to operate. Also, it features with stable performance, high precision, auto-off after 15min non-operation for energy saving, capacitance/diode/more test, overload protection, continuity test, non-contact voltage measurement(NCV), zero live line measurement, phase sequence measurement, etc. A perfect tool for professional, factory, school, enthusiast or family use.
Điểm đặc biệt
VERSATILE PEN MULTIMETER:
This multimeter features test of voltage / resistance / capacitance / diode / frequency / NCV/ continuity, zero line non-contact phase sequence detection, etc.
PHẢN ỨNG NHANH ĐỘ CHÍNH XÁC CAO:
GVDA GD109, đồng hồ vạn năng dạng bút kỹ thuật số 4000 đếm, có tốc độ lấy mẫu 3 lần / giây và đo chính xác cao.
VẬN HÀNH DỄ DÀNG:
Máy có màn hình màu LCD rõ ràng, dễ đọc các giá trị đo, đèn pin có sẵn trong bóng tối, chức năng lưu dữ liệu thuận tiện để truy vấn dữ liệu, tiếng bíp báo động khi sử dụng.
KÍCH THƯỚC CỔNG VẬT LIỆU BỀN VỮNG:
Máy đo, được làm từ các linh kiện điện tử chọn lọc và vỏ nhựa chắc chắn, được thiết kế với trọng lượng nhẹ và kích thước bỏ túi dễ - - mang theo, tạo cảm giác thoải mái khi cầm.
ỨNG DỤNG RỘNG RÃI:
Đồng hồ vạn năng kỹ thuật số -- một công cụ và trợ lý tiện dụng, để kiểm tra, chẩn đoán và giải quyết nhiều vấn đề về điện gia dụng và ô tô hàng ngày một cách an toàn và chính xác.
Thông số kỹ thuật
Chức năng chính | Dải đo | Sự chính xác |
Đo điện áp AC | 4V/4V/400V/600V | ±(0.8 percent plus 3) |
Đo điện áp DC | 4V/4V/400V/600V | ±(0.5 percent plus 3) |
Phạm vi kháng cự | 4000Ω/40KΩ/400KΩ/4MΩ | ±(1.0 percent plus 5) |
| 40MΩ | ±(1.5 percent plus 10) | |
Phạm vi điện dung | 40nF / 400nF / 4uF / 40uF / 400uF | ±(4.0 percent plus 5) |
| 4mF | ±(5.0 percent plus 5) | |
Dải tần số | 40Hz / 400Hz / 4KHz / 40kHz / 400kHz / 4MHZ | ±(1.0 percent plus 3) |
Tối đa Số lượng | 4000 lượt đếm | |
Man hinh LCD | Màn hình LCD màu HD VA | |
| Tỷ lệ lấy mẫu: | khoảng 3 lần / một giây | |
Đo lường thông minh | for AC DC Voltage, resistance and continuity) | |
Phát hiện dòng trực tiếp | Có (báo động bằng âm thanh và ánh sáng) | |
| Kiểm tra liên tục | ||
Kiểm tra diode | V (báo động bằng âm thanh) | |
| Phát hiện trình tự pha không tiếp xúc | Vâng | |
Lựa chọn bánh răng / Giữ dữ liệu / True RMS | Vâng | |
| Chỉ báo trên phạm vi: | "OL" | |
Input polarity indication | display "-" | |
Chỉ báo độ ẩm thấp | Vâng | |
Tự động tắt nguồn / Đèn pin | Vâng | |
Pin | 2x 1.5V AAA Batteries | |
Trọng lượng sản phẩm | khoảng 76g | |
Kích thước mục | 172x30x22mm | |
Kích thước hộp quà | 181x57x51mm | |
Toàn bộ đơn vị Trọng lượng | 170g | |
| Điều kiện làm việc | Nhân viên bán thời gian. : 040 độ (<80% rh,humidity:="">80%><10°c non="">10°c> | |
| Điều kiện lưu trữ | Nhân viên bán thời gian. : -1060 độ Độ ẩm: (<70% rh,="" remove="" the="">70%> | |
Xếp hạng an toàn | CON MÈO. III 600V; Mức độ ô nhiễm 2, Độ cao<> | |
Đóng gói bao gồm | 1pc vạn năng / cáp kiểm tra 1pc / 1pc hướng dẫn sử dụng tiếng anh | |
More Details
Smart Pen type Multimeter auto range GD109 New arrive

Đo lường thông minh
Smart measurement apply for the measuring of DC voltage, AC voltage, resistance, continuity and can automatically identify the measurement signal.
GHI CHÚ:Điện áp tối thiểu có thể đo được của chế độ này là khoảng 0. 8V

Đa chức năng
AC DC Voltage test / NCV Measurement/ Resistance / Frequency / Capacitance / Diode / Continue test / Live wire detection / Non contact Phase Sequency detector / Data hold/ Auto power off / Flashlight / True RMS / On off test

Đo lường NCV
1) Press POWER ON key to power on into NCV measurement mode by default
2) Đóng dần vùng cảm ứng NCV với dây dẫn được đo
● When the weak electric field signal is detected, it will display "---L"; the buzzer will sound slowly and the green light on.
●When the strongelectric field signal is detected, it will display "---H"; the buzzer will sound quickly and the red light on.

Live Wire Detection
● When the weak electric field signal is detected, it will display "---L"; the buzzer will sound slowly and the green light on.
●When the strongelectric field signal is detected, it will display "---H"; the buzzer will sound quickly and the red light on.

Phát hiện trình tự pha không tiếp xúc
1) Press POWER ON key to power on,
2) Press "FUNC" key to select "Phase"gear to enter the phase sequence detection state
a) Displaythe "PA" symbol with the "A" letter flashing and sticks the sensing probe to the first phase line, waiting for a beep
b) Displaythe "PAB" symbol with the "B" letter flashingand stick the sensing probe to the second phase line and wait for a beep
c) Displaythe "PABC" symbol with the "C" letter flashingand stick the sensing probe to the second phase line and wait for a long beep
d) At the end of the test, the display will display the measurement results on the display
◆"P --- L" symbol displayed on the screen indicates left-handed phase sequence ◆"P --- R" symbol displayed on the screen indicates right -handed phase sequence

Đèn led

Màn hình LCD màu HD

Nguồn cấp
Pin AAA 2x 1.5V có thể được thay thế

Kiểm tra chức năng
AC DC Voltage test / Capacitance test / Frequency test / Diode test / on-off beep test /

Nội dung đóng gói
1multimeter, 1probe, 1manual, 1box

Wide Application
Apply for Beginners / Electronic circuit installation / Electronic maintenance / Electromechanical mainenance / Vehicle inspection / Maintenance Household application

Chú phổ biến: Loại bút thông minh NCV Multimeter Auto Range, Trung Quốc, nhà cung cấp, nhà sản xuất, nhà máy, tùy chỉnh, bán buôn, tốt nhất, giá thấp, còn hàng, mua chiết khấu